- EDWARDS Small Dry Pumps
- EDWARDS Acoustic Enclosures
- EDWARDS Chemical & Process Pumps
- EDWARDS Industrial Dry Pump
- EDWARDS Mechanical Boosters
- EDWARDS Oil Vapor Diffusion Pumps
- Diffstak Vapour Pumps
- Standard Diffstak 100/300M Vapour Pump
- Standard Diffstak 100/300P Vapour Pump
- Standard Diffstak 160/700M Vapour Pump
- Standard Diffstak 160/700P Vapour Pump
- Standard Diffstak 250/2000M Vapour Pump
- Standard Diffstak 250/2000P Vapour Pump
- Standard Diffstak 63/150M Vapour Pump
- Standard Diffstak 63/150P Vapour Pump
- Unvalved Diffstak 100/300C Vapour Pump
- Unvalved Diffstak 100/300F Vapour Pump
- Unvalved Diffstak 160/700C Vapour Pump
- Unvalved Diffstak 160/700F Vapour Pump
- Unvalved Diffstak 250/2000C Vapour Pump
- Unvalved Diffstak 63/150C Vapour Pump
- View All
- High Throughput Diffusion Pumps
- Vapour Booster Pumps
- View All
- Diffstak Vapour Pumps
- EDWARDS Semiconductor Dry Pumps
- EDWARDS Turbomolecular Pumps
- HTC Adapter Fittings
- HTC Aluminum Block Valve
- All in one HV aluminum angle valve
- Aluminum angle valve manual with bellows
- Aluminum angle valve manual without formed bellows
- Aluminum angle valve pneumatic double-acting with bellows sensor
- Aluminum angle valve pneumatic single-acting with bellows solenoid
- Aluminum angle valve with sensor
- N.C. HV aluminum angle valve
- Pneumatic normally open single with bellows & sensor
- Pneumatic normally open single with bellows, sensor & solenoid
- View All
- HTC Bakeable All Metal Valve
- HTC Ball Valve
- HTC Centering Ring
- HTC Check Valve
- HTC Elbows-Tees-Crosses
- HTC Gate Valves
- HTC Hydroformend Vacuum Bellows
- HTC Pneumatic Butterfly Valve
- HTC Pneumatic Pendulum Valve
- HTC Teflon Coating Vacuum Valve
- HTC Transfer gate Valve and doors
- HTC Vacuum Accessories
- HTC Vacuum Clamps
- HTC Vacuum Feedthrough
- HTC Vacuum Flanges
- HTC Vacuum Poppet Valves
- HTC Vacuum Valve Kit
- HTC Vacuum Viewport
- HTC Venting Valve
Glovac Sdn Bhd
11/11A, Jalan Perisa 2,
Happy Garden,
58200 Kuala Lumpur,
Malaysia.
11/11A, Jalan Perisa 2,
Happy Garden,
58200 Kuala Lumpur,
Malaysia.
+603-7980 3721
+603-7980 3612
CXS250 ATEX CAT 2&3 T3 Medium duty+
| Previous | 13 / 16 | Next |
Overview:
Edwards pioneered the industrial dry vacuum pump in 1986 and now with more than 150,000 systems sold worldwide this Edwards expertise has been used to develop a dry pump capable of withstanding the harshest of process applications.
The CXS incorporates innovative screw design features with simplicity and reliability in mind, a ‘Plug and Pump’ philosophy has been adopted. As a result, the CXS has industry leading reliability, safety and low cost of ownership.
Features & Benefits:
Technical Data:
Edwards pioneered the industrial dry vacuum pump in 1986 and now with more than 150,000 systems sold worldwide this Edwards expertise has been used to develop a dry pump capable of withstanding the harshest of process applications.
The CXS incorporates innovative screw design features with simplicity and reliability in mind, a ‘Plug and Pump’ philosophy has been adopted. As a result, the CXS has industry leading reliability, safety and low cost of ownership.
Features & Benefits:
- Continuous vacuum from atmosphere to 10-3 mbar
- Integral temperature control
- Pumps corrosive vapours without deterioration
- Excellent liquid and solids handling
- Deeper vacuum than traditional technologies - not limited by seal fluid or cooling water temperature
Technical Data:
| Maximum pumping speed | 250 m3h-1 / 148 ft3min-1 |
| Capacity at 10 mbar (7.5 Torr) | 230 m3h-1 / 135 ft3min-1 |
| Ultimate vacuum | <0.015 mbar / <0.011 Torr |
| Maximum back pressure - standard | 1,200 mbar / 2.7 psig |
| Power consumption at 10 mbar (7.5 Torr) | 3.8 kW / 5.1 hp |
| Standard motor | |
| (200 - 230V ±10%, 3 ph, 50/60 Hz) | 7.5 kW |
| Standard motor | |
| (380 - 460V ±10%, 3 ph, 50/60 Hz) | 10 hp |
| Cooling water flow rate, (adjustable) | 4 - 10 l min-1 / |
| 1.1 - 2.6 gal min-1 | |
| Cooling water temperature | |
| 5 - 25 ºC (41 - 77 ºF) for T160 set-ups | 5 – 35 oC / 41 – 95 oF |
| Max cooling water supply pressure | 6.9 barg / 100 psig |
| Cooling water supply differential pressure | 1.6 - 5.5 bar / 23 - 80 psi |
| Seal purge flow (max) | 12 std lmin-1 / |
| 0.424 std ft3min-1 | |
| Seal purge supply pressure, (min - max) | 2.5 -6.9 barg / 36 - 100 psig |
| Noise (max) with silencer | 64 dB(A) |
| Weight (with frame and standard motor) | 470 kg / 1,034 lbs |
| Process connection, inlet | 3''/DN80 ANSI/DIN |
| Process connection, outlet | 2''/DN50 ANSI/DIN |