- EDWARDS Small Dry Pumps
- EDWARDS Acoustic Enclosures
- EDWARDS Chemical & Process Pumps
- EDWARDS Industrial Dry Pump
- EDWARDS Mechanical Boosters
- EDWARDS Oil Vapor Diffusion Pumps
- Diffstak Vapour Pumps
- Standard Diffstak 100/300M Vapour Pump
- Standard Diffstak 100/300P Vapour Pump
- Standard Diffstak 160/700M Vapour Pump
- Standard Diffstak 160/700P Vapour Pump
- Standard Diffstak 250/2000M Vapour Pump
- Standard Diffstak 250/2000P Vapour Pump
- Standard Diffstak 63/150M Vapour Pump
- Standard Diffstak 63/150P Vapour Pump
- Unvalved Diffstak 100/300C Vapour Pump
- Unvalved Diffstak 100/300F Vapour Pump
- Unvalved Diffstak 160/700C Vapour Pump
- Unvalved Diffstak 160/700F Vapour Pump
- Unvalved Diffstak 250/2000C Vapour Pump
- Unvalved Diffstak 63/150C Vapour Pump
- View All
- High Throughput Diffusion Pumps
- Vapour Booster Pumps
- View All
- Diffstak Vapour Pumps
- EDWARDS Semiconductor Dry Pumps
- EDWARDS Turbomolecular Pumps
- HTC Adapter Fittings
- HTC Aluminum Block Valve
- All in one HV aluminum angle valve
- Aluminum angle valve manual with bellows
- Aluminum angle valve manual without formed bellows
- Aluminum angle valve pneumatic double-acting with bellows sensor
- Aluminum angle valve pneumatic single-acting with bellows solenoid
- Aluminum angle valve with sensor
- N.C. HV aluminum angle valve
- Pneumatic normally open single with bellows & sensor
- Pneumatic normally open single with bellows, sensor & solenoid
- View All
- HTC Bakeable All Metal Valve
- HTC Ball Valve
- HTC Centering Ring
- HTC Check Valve
- HTC Elbows-Tees-Crosses
- HTC Gate Valves
- HTC Hydroformend Vacuum Bellows
- HTC Pneumatic Butterfly Valve
- HTC Pneumatic Pendulum Valve
- HTC Teflon Coating Vacuum Valve
- HTC Transfer gate Valve and doors
- HTC Vacuum Accessories
- HTC Vacuum Clamps
- HTC Vacuum Feedthrough
- HTC Vacuum Flanges
- HTC Vacuum Poppet Valves
- HTC Vacuum Valve Kit
- HTC Vacuum Viewport
- HTC Venting Valve
Glovac Sdn Bhd
11/11A, Jalan Perisa 2,
Happy Garden,
58200 Kuala Lumpur,
Malaysia.
11/11A, Jalan Perisa 2,
Happy Garden,
58200 Kuala Lumpur,
Malaysia.
+603-7980 3721
+603-7980 3612
GXS450/2600F 380 - 460 V, Medium Duty +, Rear Exhaust GSF150450000
| Previous | 1 / 6 | Next |
Overview:
The competitive nature of today’s business means changes are required to improve performance, lower costs, and provide optimal process solutions. The dry pumping solution is the change from traditional oil sealed pumps to a proven technology for this industry. Edwards, a world leader in dry pump technology, has demonstrated the ability to provide a low-cost, tailored solution to your vacuum application.
Features & Benefits:
Maintenance
- Low capital cost and minimal maintenance requirements lead to lowest cost of ownership.
- Extended periods between user intervention.
- Lower consumable costs.
Environmental
- No oil disposal.
- No oil emissions into atmosphere.
Performance
- Very stable pumping speed gives repeatability to processes.
- Continuous pumping at atmosphere.
- Ability to handle particulates.
- Dry eliminates back-streaming, thus protecting reactive alloys from contamination.
Safety
- Unobtrusive noise levels.
- No unsightly oil spills.
- No hazardous oil vapours.
Technical Data:
* Purge Gas information
Light duty: shaft seal purge only
Medium duty: Shaft seal purge, inlet purge, variable gas ballast & exhaust purge (with exhaust pressure sensor)
Medium duty plus: As Medium duty, plus High Flow Purge / Solvent Flush
The competitive nature of today’s business means changes are required to improve performance, lower costs, and provide optimal process solutions. The dry pumping solution is the change from traditional oil sealed pumps to a proven technology for this industry. Edwards, a world leader in dry pump technology, has demonstrated the ability to provide a low-cost, tailored solution to your vacuum application.
Features & Benefits:
Maintenance
- Low capital cost and minimal maintenance requirements lead to lowest cost of ownership.
- Extended periods between user intervention.
- Lower consumable costs.
Environmental
- No oil disposal.
- No oil emissions into atmosphere.
Performance
- Very stable pumping speed gives repeatability to processes.
- Continuous pumping at atmosphere.
- Ability to handle particulates.
- Dry eliminates back-streaming, thus protecting reactive alloys from contamination.
Safety
- Unobtrusive noise levels.
- No unsightly oil spills.
- No hazardous oil vapours.
Technical Data:
|
|
Units | GXS450 | GXS450/2600 | GXS450/4200 | ||
| Peak Pumping Speed | m3h-1 (cfm) | 450 (265) | 2200 (1295) | 3026 (1781) | ||
| Ultimate Pressure (without purge) | mbar (Torr) | 5x10-3 (3.8x10-3) | 5x10-4 (3.8x10-4) | |||
| Full Load Power | @ ultimate pressure | kW (hp) | 7.2 (9.6) | 8.8 (11.8) | 9.4 (12.6) | |
| @ peak pumping load | kW (hp) | 17.3 (23.2) | 20.0 (26.8) | 21.1 (28.3) | ||
| Electrical | Supply options | High volt | 380-460V 3Ø 50/60Hz | |||
| Low volt | 200-230V 3Ø 50/60Hz | |||||
| Connection | High volt | Harting Han K 4/4-F | Harting Han 100A-F | |||
| Low volt | ||||||
| Vacuum Couplings | Inlet | ISO100 | ISO160 | |||
| Exhaust | NW50 | |||||
| Cooling Water | Supply pressure (max) | bar (psig) | 6.9 (100) | |||
| DP across pump (min) | bar (psig) | 1 (15) | 1.5 (22) | |||
| Flow @ min DP | lmin-1 (gal/min) | 6 (1.6) | 12 (3.2) | |||
| Temperature | °C (°F) | 5-40 (41-104) All variants | ||||
| Connection | 3/8" BSP Male (G 3/8”) | |||||
| Purge Gas* | Pressure | bar (psig) | 2.5-6.9 (36-100) | |||
| Light Duty | sl/min | 12 | ||||
| Medium Duty | sl/min | 18-146 | ||||
| Connection | Swagelok® Ø ¼” tube with olive | |||||
| High Flow Purge/ Solvent Flush | Supply pressure | bar (psig) | 2.5-6.9 (36-100) | |||
| Control valve connection | Swagelok® Ø 3/8" tube with olive | |||||
| Filter connection | ½" NPT Female | |||||
| Solvent connection | 3/8" BSP Male (G 3/8") | |||||
| Mass | kg (lbs) | 640 (1411) | 860 (1996) | 868 (1914) | ||
| Noise (with suitable exhaust pipe) | dB(A) | <64 | ||||
| Operating Temperature | °C (°F) | 5-40 (41-104) | ||||
| Exhaust Back Pressure (MAX) | mbar (psia) | 1400 (20) | ||||
| System IP rating | Standard | 31 | ||||
| Lubrication | Type | PFPE Drynert® 25/6 | ||||
| Volume | l (gal) | 1.8 (0.5) | 2.5 (0.7) | 3.6 (1.0) | ||
|
Monitoring & Control |
Standard | Control | Front panel "Dashboard" | |||
| Serial - RS232 | ||||||
| Monitoring | Ethernet Webserver | |||||
| Option | Control | Parallel - MCM MicroTIM | ||||
| Control & Monitoring | Profibus DP | |||||
| Pump Display Terminal (PDT) | ||||||
| Monitoring | FabWorks® | |||||
| *Pump combinations | Light duty | Shaft Seal Purge & High Vac Purge only | ||||
|
|
Medium duty | Shaft Seal Purge, High Vac Purge, Inlet Purge, variable Gas Ballast & Exhaust Purge (with Exhaust Pressure Sensor) | ||||
|
|
Medium duty + | As Medium duty, plus High Flow Purge / Solvent Flush | ||||
* Purge Gas information
Light duty: shaft seal purge only
Medium duty: Shaft seal purge, inlet purge, variable gas ballast & exhaust purge (with exhaust pressure sensor)
Medium duty plus: As Medium duty, plus High Flow Purge / Solvent Flush