- EDWARDS Small Dry Pumps
- EDWARDS Acoustic Enclosures
- EDWARDS Chemical & Process Pumps
- EDWARDS Industrial Dry Pump
- EDWARDS Mechanical Boosters
- EDWARDS Oil Vapor Diffusion Pumps
- Diffstak Vapour Pumps
- Standard Diffstak 100/300M Vapour Pump
- Standard Diffstak 100/300P Vapour Pump
- Standard Diffstak 160/700M Vapour Pump
- Standard Diffstak 160/700P Vapour Pump
- Standard Diffstak 250/2000M Vapour Pump
- Standard Diffstak 250/2000P Vapour Pump
- Standard Diffstak 63/150M Vapour Pump
- Standard Diffstak 63/150P Vapour Pump
- Unvalved Diffstak 100/300C Vapour Pump
- Unvalved Diffstak 100/300F Vapour Pump
- Unvalved Diffstak 160/700C Vapour Pump
- Unvalved Diffstak 160/700F Vapour Pump
- Unvalved Diffstak 250/2000C Vapour Pump
- Unvalved Diffstak 63/150C Vapour Pump
- View All
- High Throughput Diffusion Pumps
- Vapour Booster Pumps
- View All
- Diffstak Vapour Pumps
- EDWARDS Semiconductor Dry Pumps
- EDWARDS Turbomolecular Pumps
- HTC Adapter Fittings
- HTC Aluminum Block Valve
- All in one HV aluminum angle valve
- Aluminum angle valve manual with bellows
- Aluminum angle valve manual without formed bellows
- Aluminum angle valve pneumatic double-acting with bellows sensor
- Aluminum angle valve pneumatic single-acting with bellows solenoid
- Aluminum angle valve with sensor
- N.C. HV aluminum angle valve
- Pneumatic normally open single with bellows & sensor
- Pneumatic normally open single with bellows, sensor & solenoid
- View All
- HTC Bakeable All Metal Valve
- HTC Ball Valve
- HTC Centering Ring
- HTC Check Valve
- HTC Elbows-Tees-Crosses
- HTC Gate Valves
- HTC Hydroformend Vacuum Bellows
- HTC Pneumatic Butterfly Valve
- HTC Pneumatic Pendulum Valve
- HTC Teflon Coating Vacuum Valve
- HTC Transfer gate Valve and doors
- HTC Vacuum Accessories
- HTC Vacuum Clamps
- HTC Vacuum Feedthrough
- HTC Vacuum Flanges
- HTC Vacuum Poppet Valves
- HTC Vacuum Valve Kit
- HTC Vacuum Viewport
- HTC Venting Valve
Glovac Sdn Bhd
11/11A, Jalan Perisa 2,
Happy Garden,
58200 Kuala Lumpur,
Malaysia.
11/11A, Jalan Perisa 2,
Happy Garden,
58200 Kuala Lumpur,
Malaysia.
+603-7980 3721
+603-7980 3612
615 MH10, 10hp, 230/460V, 3-ph, 60Hz @ 1800rpm 900615MH10
| Previous | 10 / 10 | Next |
Overview:
Stokes 6" series mechanical boosters are designed to be used in conjunction with rotary-piston, dry vacuum, rotary vane and liquid ring pumps to increase pumping speed at working pressures and shorten pump down time significantly. The Stokes 6" series can be mounted separately or on the inlet of the backing pump to create a compact integrated package.
Featuring an extra large diameter shaft, the Stokes 6” series has the capability for use with higher powered motors in addition to ensuring a uniquely rugged and durable mechanical booster. This allows the pumps to operate at their full displacement from atmospheric pressure with an appropriately sized backing pump.
The Stokes 6" series must be backed by a primary vacuum pump designed to discharge to atmospheric pressure. Examples of suitable backing pumps are listed below:
Features & Benefits:
Technical Data:
Stokes 6" series mechanical boosters are designed to be used in conjunction with rotary-piston, dry vacuum, rotary vane and liquid ring pumps to increase pumping speed at working pressures and shorten pump down time significantly. The Stokes 6" series can be mounted separately or on the inlet of the backing pump to create a compact integrated package.
Featuring an extra large diameter shaft, the Stokes 6” series has the capability for use with higher powered motors in addition to ensuring a uniquely rugged and durable mechanical booster. This allows the pumps to operate at their full displacement from atmospheric pressure with an appropriately sized backing pump.
The Stokes 6" series must be backed by a primary vacuum pump designed to discharge to atmospheric pressure. Examples of suitable backing pumps are listed below:
- GV Drystar or Chemical Drystar dry pumps
- Two stage LR series liquid ring pumps
- RV, EM or EVC oil sealed pumps
- Microvac series piston pumps
Features & Benefits:
- Mechanical shaft seal – improved life and serviceability
- Ringfeder® keyless gear locking system – stronger, faster timing
- Large shaft diameters – allowing improved performance at high pressures
- Belt drive or direct drive capability
- Vertical or horizontal gas flow
- Drive end roller bearing – resists belt pull and thermal effects
- Over-sized anti-friction bearings – increased uptime and longer service intervals
- Rugged proven design and construction
- Quiet operation
- Unique impeller design -Dynamically balanced to minimize vibration
- High volumetric efficiency
- High differential pressure – operation capability
- Available by-pass option for improved pumpdown
- Available process isolation seal option – optimum protection from dust and particulate contamination
Technical Data:
| Displacement | |
| V belt (2750 rpm) | 3375m3h-1 / 2000ft3min-1 |
| Direct drive (1800 rpm) | 2210m3h-1 / 1300ft3min-1 |
| Direct drive (3000 rpm) | 3685m3h-1 / 2170ft3min-1 |
| Direct drive (3600 rpm) | 4420m3h-1 / 2600ft3min-1 |
| Inlet/outlet flanges | 8” ASA/ANSI flange |
| Motor power EU/Asia | 11kW |
| Motor power US TEFC | 10hp |
| Cooling method | Air cooled |
| Oil capacity (horizontal flow) | 1.9 litre / 0.51gal |
| Oil capacity (vertical flow) | 4.1 litre / 1.1gal |
| Max pressure differential | 506mbar / 380Torr |
| Max temp rise | 135°C / 275°F |
| Max discharge temp | 191°C / 375°F |
| Weight bare shaft | 234kg / 515 lbs |
| Weight TEFC direct drive | 390kg / 860lbs |
| Recommended Oil | V- Lube H |