- EDWARDS Small Dry Pumps
- EDWARDS Acoustic Enclosures
- EDWARDS Chemical & Process Pumps
- EDWARDS Industrial Dry Pump
- EDWARDS Mechanical Boosters
- EDWARDS Oil Vapor Diffusion Pumps
- Diffstak Vapour Pumps
- Standard Diffstak 100/300M Vapour Pump
- Standard Diffstak 100/300P Vapour Pump
- Standard Diffstak 160/700M Vapour Pump
- Standard Diffstak 160/700P Vapour Pump
- Standard Diffstak 250/2000M Vapour Pump
- Standard Diffstak 250/2000P Vapour Pump
- Standard Diffstak 63/150M Vapour Pump
- Standard Diffstak 63/150P Vapour Pump
- Unvalved Diffstak 100/300C Vapour Pump
- Unvalved Diffstak 100/300F Vapour Pump
- Unvalved Diffstak 160/700C Vapour Pump
- Unvalved Diffstak 160/700F Vapour Pump
- Unvalved Diffstak 250/2000C Vapour Pump
- Unvalved Diffstak 63/150C Vapour Pump
- View All
- High Throughput Diffusion Pumps
- Vapour Booster Pumps
- View All
- Diffstak Vapour Pumps
- EDWARDS Semiconductor Dry Pumps
- EDWARDS Turbomolecular Pumps
- HTC Adapter Fittings
- HTC Aluminum Block Valve
- All in one HV aluminum angle valve
- Aluminum angle valve manual with bellows
- Aluminum angle valve manual without formed bellows
- Aluminum angle valve pneumatic double-acting with bellows sensor
- Aluminum angle valve pneumatic single-acting with bellows solenoid
- Aluminum angle valve with sensor
- N.C. HV aluminum angle valve
- Pneumatic normally open single with bellows & sensor
- Pneumatic normally open single with bellows, sensor & solenoid
- View All
- HTC Bakeable All Metal Valve
- HTC Ball Valve
- HTC Centering Ring
- HTC Check Valve
- HTC Elbows-Tees-Crosses
- HTC Gate Valves
- HTC Hydroformend Vacuum Bellows
- HTC Pneumatic Butterfly Valve
- HTC Pneumatic Pendulum Valve
- HTC Teflon Coating Vacuum Valve
- HTC Transfer gate Valve and doors
- HTC Vacuum Accessories
- HTC Vacuum Clamps
- HTC Vacuum Feedthrough
- HTC Vacuum Flanges
- HTC Vacuum Poppet Valves
- HTC Vacuum Valve Kit
- HTC Vacuum Viewport
- HTC Venting Valve
Glovac Sdn Bhd
11/11A, Jalan Perisa 2,
Happy Garden,
58200 Kuala Lumpur,
Malaysia.
11/11A, Jalan Perisa 2,
Happy Garden,
58200 Kuala Lumpur,
Malaysia.
+603-7980 3721
+603-7980 3612
EPX180L Dry pump 200V A41941002
| Previous | 7 / 16 | Next |
Overview:
The EPX series uses a unique, patented, single-shaft regenerative/Holweck® stage mechanism that makes them capable of pumping from atmosphere to ultimate pressures of < 1x10-4 mbar or < 1x10-6mbar depending on model. They are ideal for applications where a better base pressure is required than can be delivered by a typical primary pump and where otherwise a turbomolecular pump and primary pump would be required and also for applications that cycle frequently from atmosphere to low pressures as they can operate continuously at all inlet pressures.
Features & Benefits:
Compact footprint – the EPX is more compact than the equivalent turbomolecular pump and primary pump combination.
Low cost of ownership – zero routine maintenance with a 5 year service interval.
Unique patent protected pumping mechanism – the EPX can pump down from atmosphere to turbomolecular base pressure and can operate continuously at all inlet pressures. No separate “rough pumping” required.
Ultra clean mechanism – EPX pumps have no grease or oil under vacuum and present no other source of potential contamination.
Extremely reliable – based on field proven IPX technology, the EPX has a MTBFp = 13 years (SEMI E10) with service periods of around every 5 years to maximize the life of the pump.
Water cooled – low environmental heat load
Low noise and vibration – better working environment. Ideal for vibration sensitive environments.
Technical Data:
The EPX series uses a unique, patented, single-shaft regenerative/Holweck® stage mechanism that makes them capable of pumping from atmosphere to ultimate pressures of < 1x10-4 mbar or < 1x10-6mbar depending on model. They are ideal for applications where a better base pressure is required than can be delivered by a typical primary pump and where otherwise a turbomolecular pump and primary pump would be required and also for applications that cycle frequently from atmosphere to low pressures as they can operate continuously at all inlet pressures.
Features & Benefits:
Compact footprint – the EPX is more compact than the equivalent turbomolecular pump and primary pump combination.
Low cost of ownership – zero routine maintenance with a 5 year service interval.
Unique patent protected pumping mechanism – the EPX can pump down from atmosphere to turbomolecular base pressure and can operate continuously at all inlet pressures. No separate “rough pumping” required.
Ultra clean mechanism – EPX pumps have no grease or oil under vacuum and present no other source of potential contamination.
Extremely reliable – based on field proven IPX technology, the EPX has a MTBFp = 13 years (SEMI E10) with service periods of around every 5 years to maximize the life of the pump.
Water cooled – low environmental heat load
Low noise and vibration – better working environment. Ideal for vibration sensitive environments.
Technical Data:
| Peak speed | 170 m3h-1 |
| 105 ft3min-1 | |
| 2835 lmin-1 | |
| Ultimate vacuum | |
| <1 x 104 mbar | |
| <7.5 x 10-5 Torr | |
| <1 x 10-2 Pa | |
| Warm-up time (to nominal performance) | 30 min |
| Inlet flange | ISO63 |
| Outlet flange | NW25 |
| Noise | <59 dB(A) |
| Water connectors | 3/8 in Quick |
| Minimum cooling water flow rate | 2 lm-1 |
| Cooling water temperature | 15 – 35 °C |
| Electrical Supply | 200/208 V, 50/60 Hz 3 phase |
| Power at ultimate | 1.4 kW |
| Rated motor power | 3.0 kW |
| TIM | C3 |
| Weight | 43.5 kg |